Email :
Telp / WA : 0812 1248 2471

VDP150 Positive Displacement Valve


The VDP150 positive displacement valve was developed for dispensing small shots of low and medium viscosity materials. The double-acting metering system provides accurate shot sizes of 0.005cc to 0.15cc.

The VDP150 is designed for use with the VC-1195A Valve Controller.


• Designed for low to medium viscosity materials
• Dispenses accurate micro-shots of 0.005 to 0.015cc
• Stroke adjustment feature provides accurate shot size control
• Suck-Back feature eliminates post-dispense “dripping”

VDP150     Positive Displacement Valve
VC-1195A     Valve Controller 110V
VCE-1195A     Valve Controller 220V CE

Operating Air Pressure:     60-90 PSI
Material delivery pressure:     Spring wire diameter : ø0.3mm – Max 0.3kgf/cm2

Spring wire diameter : ø0.5mm – Max 1.2kgf/cm2
Cycle Rate:     120cycles/min (full stroke)
Minimum Shot Size:     0.005cc
Maximum Shot Size:     0.15cc/cycle
Measuring Type:     Plunger
Weight:     320g
Driving part materials:     Cylinder Body, CAP : AL Hard Anodizing (BLACK)
Piston: SUS303
Check Body: SUS303, RULON
Wetted part materials:     Chamber: SUS303
Plunger: SUS420(Tin Coating)
CAP, CV Body: SUS303
Check Valve: PEEK
O-Ring: Perfluore
Connecting Ports:     Operating Air Input: M5xP0.8 ø4 Urethane Hose
Material Inlet: BSPT1/8″
Material Outlet: Luer Lock (male)


There are no reviews yet.

Be the first to review “VDP150 Positive Displacement Valve”

Your email address will not be published. Required fields are marked *