Description
Product Features
- Tests 3 equivalent specimens at one operation and exports test results in average value
- 2 test modes for both films and packages, and accessories for package test are available for customization
- Equipped with constant temperature and humidity control devices (optional parts) to meet different test requirements
- Reference film for fast calibration to ensure accurate and universal test data
- The instrument is controlled by micro-computer with LCD, menu interface and PVC operating panel, which could conveniently export test data, test results and test curves
- Test data could be automatically and safely saved by the function of power failure protection
- Micro-printer and standard RS232 port for convenient data output and transfer
- Supports LystemTM Lab Data Sharing System for uniform management of test results and test reports
Principle
The pre-conditioned specimen is mounted between the upper and lower chambers at ambient atmospheric pressure. One chamber contains oxygen and the other chamber is slowly purged by a stream of nitrogen. Due to the concentration difference between the two chambers, oxygen molecules permeate through the specimen into the nitrogen side and are taken to the coulometric sensor where proportional electrical signals are generated. The oxygen transmission rate is then obtained by analyzing and calculating the signals. For package samples, high purity nitrogen flows inside the package, and oxygen flows outside.
Standards
This test instrument conforms to the following standards:
ISO 15105-2, GB/T 19789, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K7126-2, YBB00082003
Applications
This test instrument is applicable to the determination of oxygen transmission rate of:
| Basic Applications |
|---|
|
|
|
| Extended Applications |
|
|
|
|
|
|
|
|
|
|
|
Technical Specifications
| Specifications | Film Test | Package Test (customization available) |
|---|---|---|
| Test Range | 0.01 ~ 1000 cm3/m2·d (standard) 0.1 ~ 10,000 cm3/m2·d (optional) |
0.0001 ~ 10 cm3/pkg·d (standard) |
| Number of Specimens | 1 ~ 3 | |
| Resolution | 0.01 cm3/m2·d | 0.0001 cm3/pkg·d |
| Temperature Range | 15°C ~ 55°C (optional) | / |
| Temperature Accuracy | ±0.1°C | / |
| Humidity Range | 0%RH, 15%RH ~ 90%RH, 100%RH (optional) |
|
| Humidity Accuracy | ±1%RH | |
| Test Gas | O2 and air (outside of supply scope) | |
| Test Area | 50 cm2 | / |
| Thickness | ≤3 mm (customization is available for other thickness) | / |
| Specimen Size | 108 mm x 108 mm | Test in 100% O2: Specimen should be smaller than Ф120 mm and lower than 360 mm |
| Test in the Air: No size limitation | ||
| Bottles: the inner diameter should be bigger than Ф8 mm, outer diameter should be smaller than Ф42 mm (Standard) | ||
| Bags or Boxes: Supported by accessories | ||
| Carrier Gas | High purity nitrogen with more than 99.999% concentration (outside of supply scope) |
|
| Gas Supply Pressure | ≥ 0.28 MPa | |
| Port Size | 1/8 inch copper tubing | |
| Instrument Dimension | 670 mm (L) x 410 mm (W) x 310 mm (H) | 670 mm (L) x 410 mm (W) x 630 mm (H) |
| Power Supply | 220VAC 50Hz / 120VAC 60Hz | |
| Net Weight | 48 kg | 50 kg |
Configurations
- Standard Configurations
- Instrument, Micro-printer, Professional Software
- Optional Parts
- Constant Temperature Control Device, Constant Humidity Control Device, Sealing Accessories for Package Test and Test Hood for Package Test
- Note
- 1. The gas supply port of the instrument is 1/8 inch copper tubing;
2. Customers will need to prepare for gas supply.
Reviews
There are no reviews yet.