Email : alfin@taharica.com
Telp / WA : 0812 1248 2471

ConLab 0-150 Volt AC Transmitter Sensor T-CON-ACT-150

Jual Data Logger energi | Distributor Data Logger Hobo di Indonesia | Distributor Weather Station ( alat ukur cuaca )
0-150 volt self-powered transformer for monitoring sine wave, single-phase AC voltage. Requires Input Cable for use with U12 loggers.

Description

Highlighted Features

  • Plug directly into the external input jacks of U12 or ZW Family loggers to expand the range of measurement options and applications

In what environment does this sensor operate?

This sensor operates in an indoor environment.

What measurements does this sensor support?

The T-CON-ACT-150 sensor supports the following measurement: AC Voltage
The country of origin for this product is Israel. To see the full specifications for this product, please see our product manual found under the documentation tab if available

Ranges: 0–150 volts RMS
Sensor accuracy: < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range)
Over range: +20% of span
Over load: +40% of span
Frequency: 60 Hz AC
Supply: Self-powered
Output: 0–20 mA
Response time to 90%: <240 msec
Operating conditions: -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing
Housing: Plastic polycarbonate
Protection Level
Box: According to IP-50 DIN 40050
Terminals: According to IP-10 DIN 40050
Mounting: Standard 35mm DIN rail

Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.

Requirements

For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)

Reviews

There are no reviews yet.

Be the first to review “ConLab 0-150 Volt AC Transmitter Sensor T-CON-ACT-150”

Your email address will not be published. Required fields are marked *